![SSC13-060-U](https://www.crossocean.com/wp-content/uploads/2022/03/SSC13-060-U.png)
![SSC13-065-U](https://www.crossocean.com/wp-content/uploads/2022/03/SSC13-065-U.png)
CX2SN13-60 WITH SSC13-60
CS2P13-65 WITH SSC13-65
Each one size of SSD closed end covers are for all units. However, SSC open covers have different bore sizes for CX (SN & SAF) units from CS & CXC units. CX inserts are one size bigger than CS & CXC inserts to accomodate with the standard adapter sleeves. Please check in detail at https://www.crossocean.com/ssc-covers/
![V-ring-assemble](https://www.crossocean.com/wp-content/uploads/2022/03/V-ring-assemble.png)
Installing SSC covers is very simple.
1. Make sure that the shaft is dry and free from grease or oil.
2. Lubricate the lip of the V-ring with a thin film of grease or silicone oil.
3. Slide V-ring along the shaft by applying pressure and rotating shaft by hand.
![ssc-cover](https://www.crossocean.com/wp-content/uploads/2022/03/ssc-cover.png)
CONTACT SEAL
![ssc-cover-L](https://www.crossocean.com/wp-content/uploads/2022/03/ssc-cover-L.png)
LABYRINTH SEAL
(HIGH SPEED)
![ssc-cover-LT](https://www.crossocean.com/wp-content/uploads/2022/03/ssc-cover-LT.png)
W/O V-RING SEAL
(HIGH TEMP)