Steam Blowers of the textile manufacturer (1900RPM)
![SN515](https://www.crossocean.com/wp-content/uploads/2021/10/SN515.png)
BEFORE
SN515
The surface temperature of the unit rises to 100°C (230° F) within two months of installation. The grease from the unit is changed every two months. The temperature decreases initially after greasing to 80°C (176°F) before starting to rise again.
They cannot change all the grease using a grease gun so they have to take apart the upper part of the housing and clean out all the old grease by hand. This process takes over two hours.
![CX2SN15-065L](https://www.crossocean.com/wp-content/uploads/2021/10/CX2SN15-065L.png)
AFTER
CX2SN15-065L
The surface temperature of the units initially went up to 120°C (248°F) and then decreased to 80°C (176° F) after the excess grease was purged within 24 hours. The temperature since then has remained between 65°C (149°F) and 80°C (176°F).
They don’t need to worry about the temperature any more. The COC unit saves money in downtime, labor and the cost of the grease.