SSC COVERS FOR CX UNITS (SN & SAF)

CX UNITS SSC COVERS

Shaft Dia. d Open Cover End Cover V-ring Seal D B M N V-ring Seal
SN & SAF  Pillow Block SN & SAF Fixed 2SN & SAF Expansion (E) b b (L) c
inch (mm) inch (mm) inch (mm) inch (mm) inch (mm) inch (mm) inch (mm) inch (mm)
1-3/4 in. SSC10-045 SSD10 VS-045 3-17/32 (90) 1-19/32 (40) 2-9/32 (57.7) 2-3/64 (52) 2-1/4 (57) 31/64 (12.5) 9/16 (14.5) 13/64 (5)
45 mm
1-15/16 in. SSC11-050 SSD11 VS-050 3-15/16 (100) 1-1/2 (38) 2-3/16 (55) 2-1/16 (52.2) 2-19/64 (58.2)
50 mm
2 in.
55 mm SSC12-055 SSD12 VS-055 4-11/32 (110) 1-23/32 (44) 2-15/32 (62.6) 2-11/32 (59.7) 2-5/8 (65.7)
2-3/16 in. SSC13-060 SSD13 VS-060 4-23/32 (120) 1-31/32 (50) 2-13/16 (71.6) 2-5/8 (66.6) 2-55/64 (72.6)
60 mm
2-7/16 in. SSC15-065 SSD15 VS-065 5-1/8 (130) 1-15/16 (49) 2-25/32 (70.6) 2-37/64 (65.6) 2-13/16 (71.6)
65 mm
2-11/16 in. SSC16-070 SSD16 VS-070 5-1/2 (140) 2-1/16 (52) 2-15/16 (74.6) 2-47/64 (69.6) 2-63/64 (75.6) 39/64 (15.5) 11/16 (17.5) 15/64 (6)
70 mm
2-15/16 in. SSC17-075 SSD17 VS-075 5-29/32 (150) 2-1/16 (52) 3 (76.3) 2-51/64 (71.1) 3-1/32 (77.1)
75 mm
80 mm SSC18-080 SSD18 VS-080 6-5/16 (160) 1-31/32 (50) 3 (76.3) 2-13/16 (71.5 3-3/64 (77.5)
85 mm SSC19-085 SSD19 VS-085 6-11/16 (170) 2-3/32 (53) 3-3/16 (80.8) 2-63/64 (76) 3-15/64 (82)
3-7/16 in. SSC20-090 SSD20 VS-090 7-3/32 (180) 2-3/16 (55) 3-5/16 (84.3) 3-1/8 (79.5) 3-23/64 (85.5)
90 mm
100 mm SSC22-100 SSD22 VS-100 7-7/8 (200) 2-3/8 (60) 3-21/32 (92.5) 3-1/2 (88.7) 3-23/32 (94.7)
3-15/16 in.
110 mm SSC24-110 SSD24 VS-110 8-15/32 (215) 2-17/32 (64) 3-15/16 (100) 3-25/32 (96.2) 4-1/16 (103.2) 11/16 (17.5) 49/64 (19.5) 9/32 (7)
4-7/16 in. SSC26-115 SSD26 VS-110 9-1/16 (230) 2-19/32 (66) 4-1/8 (105) 3-63/64 (101.2) 4-17/64 (108.2)
115 mm
125 mm SSC28-125 SSD28 VS-130 9-27/32 (250) 2-3/4 (70) 4-3/8 (111.2) 4-7/32 (107.2) 4-1/2 (114.2)
4-15/16 in.
135 mm SSC30-135 SSD30 VS-140 10-5/8 (270) 2-3/4 (70) 4-9/16 (115.7) 4-15/64 (107.7) 4-19/32 (116.7)
5-7/16 in. SSC32-140 SSD32 VS-140 11-13/32 (290) 2-7/8 (73) 4-13/16 (122.2) 4-1/2 (114.2) 4-27/32 (123.2)
5-1/2 in.
140 mm

SSC COVERS FOR CS & CXC UNITS

CS & CXC UNITS SSC COVERS

Shaft Dia. d Open Cover End Cover V-ring Seal D B M N V-ring Seal
2P,2EP,4P Pillow Block 4F 4-Bolt Flange 4FC  Pilot Flange 2P,2EP,4P Fixed 2P,2EP,4P Expansion (E) b b (L) c
inch (mm) inch (mm) inch (mm) inch (mm) inch (mm) inch (mm) inch (mm) inch (mm) inch (mm) inch (mm)
1-7/16 in. SSC08-038 SSD08 VS-038 3-5/32 (80) 1-13/32 (36) 2-3/32 (53.2) 3-5/32 (80.4) 1-13/16 (45.7) 1-57/64 (48) 2-3/32 (53) 27/64 (10.6) 29/64 (11.6) 5/32 (4)
1-1/2 in. SSC08-040 VS-040 31/64 (12.5) 9/16 (14.5) 13/64 (5)
40 mm SSC08-040
1-11/16 in. SSC09-045 SSD09 VS-045 3-11/32 (85) 1-3/8 (35) 2-1/16 (52.4) 3-5/32 (80.3) 1-23/32 (44) 1-27/32 (46.8) 2-1/32 (51.8)
1-3/4 in. SSC09-045
45 mm SSC09-045
1-15/16 in. SSC10-050 SSD10 VS-050 3-17/32 (90) 1-19/32 (40) 2-9/32 (57.7) 3-7/16 (87.2) 1-29/32 (48.8) 2-1/32 (51.5) 2-7/32 (56.5)
50 mm SSC10-050
2 in. SSC10-050
55 mm SSC11-055 SSD11 VS-055 3-15/16 (100) 1-1/2 (38) 2-3/16 (55) 3-7/16 (87.5) 1-25/32 (45.5) 2-1/16 (52.2) 2-19/64 (58.2)
2-3/16 in. SSC11-055
2-1/4 in. SSC11-055
60 mm SSC13-060 SSD13 VS-060 4-23/32 (120) 1-31/32 (50) 2-29/32 (73.4) 4-9/32 (108.8) 2-15/32 (62.3) 2-9/16 (65) 2-51/64 (71)
2-7/16 in. SSC13-060
2-1/2 in. SSC13-065 VS-065
65 mm SSC13-065
2-11/16 in. SSC15-070 SSD15 VS-070 5-1/8 (130) 1-15/16 (49) 2-27/32 (72.4) 4-5/16 (109.5) 2-15/32 (62.7) 2-33/64 (63.8) 2-3/4 (69.8) 39/64 (15.5) 11/16 (17.5) 15/64 (6)
2-3/4 in. SSC15-070
70 mm SSC15-070
2-15/16 in. SSC15-075 VS-075
75 mm SSC15-075
3 in. SSC15-075
80 mm SSC18-080 SSD18 VS-080 6-5/16 (160) 1-31/32 (50) 3-1/16 (78) 4-27/32 (123) 2-31/32 (75.6) 2-3/4 (69.8) 2-63/64 (75.8)
85 mm SSC18-085 VS-085
3-7/16 in. SSC18-085
3-1/2 in. SSC18-090 VS-090
90 mm SSC18-090
100 mm SSC20-100 SSD20 VS-100 7-3/32 (180) 2-3/16 (55) 3-3/8 (86) 5-9/32 (134) 3-1/4 (82.2) 3-1/16 (77.8) 3-19/64 (83.8)
3-15/16 in. SSC20-100
4 in. SSC20-100
4-7/16 in. SSC22-110 SSD22 VS-110 7-7/8 (200) 2-3/8 (60) 3-21/32 (92.5) - - 3-1/2 (88.7) 3-23/32 (94.7) 11/16 (17.5) 49/64 (19.5) 9/32 (7)
  • Limpe o anel em V, abra a tampa e o eixo.
  • Certifique-se de que o eixo esteja seco e livre de graxa ou óleo.
  • Lubrifique o lábio do anel em V com uma fina camada de graxa ou óleo de silicone.
  • Deslize o anel em V ao longo do eixo aplicando pressão e girando o eixo manualmente.
  • Ajuste para obter a dimensão "b" para obter a pressão ideal do lábio.
  • Retire o plugue de drenagem para aplicações de vedação de labirinto para drenar a água que entrou.